Contact Us

DIN Rail Configuration Readies Model 7305 CAT5e AB Switch for Process Control Systems

The Model 7305 is a small modular CAT5e A/B switch with a DIN rail bracket on the rear panel. Multiple units can be set up in a process control system.
    CRANSTON, RI, November 23, 2013 /24-7PressRelease/ -- Electro Standards Laboratories, Cranston, RI, announces the Model 7305 single channel RJ45 CAT5e A/B switch with exclusive remote control. The Model 7305 allows the user the capability of accessing two separate devices, ports A and B, via connection through a device connected to the COMMON port. The switch is enclosed in a slim black anodized chassis designed to provide EMI/RFI shielding and mount on a standard DIN rail.

There is no local or front-panel switch control on the switch. The Model 7305 can only be switched remotely from the DB9 remote port located on the bottom of the unit. The switch ports are transparent to all data. All (8) pins of the RJ45 interface are switched. The Model 7305 is certified for CAT5e compliance.

Remote voltage control provides low power dry contact logic to allow the control of the switch position. The switch reverts to the A position on power loss and continues to pass data. Upon power up, the unit switches based on the state of the remote port. The front-panel LED's display the switch position and power status. Custom length RJ45 cables are available for your switch installation.

There are three RJ45 female port connectors labeled A, B, and COMMON. For remote control, the (1) DB9 female port accepts low power dry contact logic to allow the control of the switch position. Two front-panel LED's display the switch position. The power requirements are 24 VDC to be supplied to the switch. The dimensions for the DIN rail mount package are 1.75" W x 4.25" H x 8.0" D (4.4 x 10.8 x 20.3 cm). The Model 7305 weighs approximately 1.5 lbs. (0.7 Kg).

The Model 7305 is available for export worldwide. For more information on the Model 7350 visit the company's e-commerce Website http://www.electrostandards.com/ProductDetail/?productid=2284. A full-color application diagram is on the product page as well as a link to the product specification sheet. To speak to a knowledgeable sales engineer to discuss the product or applications, call 401-943-1164 or email eslab@electrostandards.com.

Electro Standards Laboratories manufactures copper and fiber optic network switches, interface converters and cable assemblies. Switches are designed in rackmount, desktop, board only, and DIN rail configurations. Control methods include manual, remotely controllable, IP addressable, and Android app.


# # #

Read more Press Releases from Jeannette Gouin:


Contact Information


Jeannette Gouin
Electro Standards Laboratories

Cranston, Rhode Island
US
Voice: 401-943-1164
E-Mail: Email Us Here
Website: Visit Our Website

Like This Story?


I like it! 0

Disclaimer


If you have any questions regarding information in this press release, please contact the person listed in the contact module of this page. Please do not attempt to contact 24-7 Press Release Newswire. We are unable to assist you with any information regarding this release. 24-7 Press Release Newswire disclaims any content contained in this press release. Please see our complete Terms of Service disclaimer for more information.