November 10, 2017


LBFG Develops New E-Book and Webinar Focusing on Air Barrier Failures
-- Prevent Mold and Moisture Problems in Buildings through Air Tightness --

    ORLANDO, FL, November 10, 2017 /24-7PressRelease/ -- Despite significant advances in air barrier understanding within the design and construction industry, many aspects about air barriers are still not well understood and, as a result, are leading to moisture and mold problems (especially in hot, humid climates).

In response to this critical issue, Liberty Building Forensics Group (LBFG) has produced a complimentary e-book that speaks directly to the most common air barrier-related factors causing mold and moisture problems in hot and humid climates. (Visit http://bit.ly/2hlSdPG to download.)

The industry is currently experiencing a divorce between facade performance requirements and HVAC system performance requirements. For example, driven by energy savings objectives, HVAC designers are using certain systems (such as heat recovery units, or HRUs) on a regular basis, virtually requiring the facade to perform in such a way that it becomes the primary differentiator between the building either experiencing or avoiding mold and moisture problems.

"This reality is further complicated by the fact that both facade and HVAC designers are carrying out their respective roles within a vacuum of each other," said LBFG President George DuBose, CGC. "In a hotel that employs an HRU system as its make-up and exhaust air systems, this can be catastrophic."

One solution currently adopted by the industry is to conduct testing of components, systems, or even the whole building in order to gain some degree of confidence that air leakage into a building complies with a certain standard. Unfortunately for the designer, various testing standards can seem to compete with one another and are usually too complicated or ambiguous for the day-to-day practitioner. If a building leaks air at or below the level currently designated in standards, especially if it is located in a hot and humid climate, it will inevitably have mold and moisture problems.

True air leakage criteria is difficult to test for and often does not represent how a building will actually operate. Because this significant industry crisis is avoidable, LBFG has developed a free webinar explaining how to mitigate against this risk on your current and future projects. (Visit http://bit.ly/2yHIcnA to register.)

Learn what you need to do right now to avoid an air barrier-related catastrophic mold and moisture problem down the road.

Please download our firm brochure (http://bit.ly/2AjMhuA) or visit http://www.buildingforensicsgroup.com/who-we-are/ for more information on the firm and its experts.

# # #


Contact Information:
George DuBose
Liberty Building Forensics Group
Zellwood, Florida
United States
Voice: (407) 467-5518
Website: http://www.buildingforensicsgroup.com

Disclaimer:
If you have any questions regarding information in this press release, please contact the person listed in the contact module of this page. Please do not attempt to contact 24-7 Press Release Newswire. We are unable to assist you with any information regarding this release. 24-7 Press Release Newswire disclaims any content contained in this press release. Please see our complete Terms of Use disclaimer for more information.
This News Release can be viewed online at: http://www.24-7pressrelease.com/press-release-service/446404